Google Voice on OBi ATA Manual Configuration

-

Third-party firmware

http://www.obifirmware.com/


1. Install third-party firmware.

​You can enable access from the WAN port, Login from the LAN port, default IP 192.168.10.1 and username/password admin/admin, and go to "System Management > Sevice Admin> uncheck Default box and check the box in the middle 
image.png

2. log in to the Obi202 from the LAN port, click Google Voice and Provisioning, 
​
image.png
Instructions:
1) open this link in new tab to request a single-use authorization token for "obitalk.com": request GV oauth token

2) after logging into your google voice account and agreeing to grant obitalk.com permission to make/receive calls (click 'select all' permissions if prompted), your browser will receive a 404 error from www.obitalk.com because it is no longer functional as of 10/31/2024. however, an authorization code is present in that url

3) copy/paste the full non-functional url from the other tab into the textbox below (it will look like 'https://www.obitalk.com/obinet/pg/obhdev/gvtoken?code=xxxxxxxxxxxxxxxxxx&scope=blah&lotsofotherstuff=junk') and then click 'Get Refresh Token From Code In URL' button below

4) copy/paste the Refresh Token contents (that will appear after button is pressed) into obi local web gui's AuthPassword field at Voice Services > SPx Service > SIP Credentials > AuthPassword (SPx # must match config chosen in next step), then click Submit at the bottom

5) based on the desired SPx # used in step5, choose the corresponding config URL for provisioning:
  SP1: https://www.obifirmware.com/fw/EnableGVSIPWithoutOBiTALK.xml
  SP2: https://www.obifirmware.com/fw/EnableGVSIPWithoutOBiTALK_SP2.xml
  SP3: https://www.obifirmware.com/fw/EnableGVSIPWithoutOBiTALK_SP3.xml
  SP4: https://www.obifirmware.com/fw/EnableGVSIPWithoutOBiTALK_SP4.xml

6) copy/paste chosen url into local webgui at System Management > Auto Provisioning > ITSP Provisioning > ConfigURL, set provisioning "Method" to "System Start", click Submit at the bottom, then click Reboot to force the config to download
URL: 

Comments

Post a Comment

Popular posts from this blog

Extracting and using a modified VMWare Player BIOS or UEFI firmware

-
https://pete.akeo.ie/2011/06/extracting-and-using-modified-vmware.html Extracting and using a modified VMWare Player BIOS or UEFI firmware (updated 2016.05.17 for VMWare UEFI firmware extraction) One day or another, you may want to play with BIOS/UEFI firmware modification. But before jumping into physical motherboard flash alteration, where the consequences of a mishap can be difficult to salvage, experimenting with the BIOS/UEFI in a virtual environment sounds like a sound first step. You have of course the opportunity to do so using  bochs , however the ubiquitous nature and ease of use of the (freely available)  VMware Player  can turn the latter in a much better candidate for the job if you don't really care about the extra features that bochs brings in. This post details how one can extract the BIOS/UEFI firmwares used by the VMWare Player, and how to setup the player to use a modified one. Download and install VMware Player. The current version of VMwar...
Read more

Activate Synology Active Backup for Business for DSM 6

-
 Activate Synology Active Backup for Business with Xpenology DSM  https://gist.github.com/igresc/91e468f3d2ad5f2f7407262ba6f0dd56 Install the package and run the URL below on the browser . Active Backup for Business 1. Replace the IP, username, and password  http:// 192.168.0.1 :5000/webapi/auth.cgi?api=SYNO.API.Auth&method=Login&version=1&account= admin &passwd= password {"success":true} 2. Replace IP and Serial http:// 192.168.0.1 :5000/webapi/entry.cgi?api=SYNO.ActiveBackup.Activation&method=set&version=1&activated=true&serial_number= 1780PDN123456 {"data":{"activated":true},"success":true} Active Backup for G Suite 1. Replace IP http:// 192.168.0.1 :5000/webapi/entry.cgi?api=SYNO.ActiveBackupGSuite&method=get_activation&version=1 {"data":{"activated":false,"serial_number":"1780PDN123456"},"success":true} 2. Replace IP and Serial 1. Replace IP http:// 19...
Read more

Windows 11 internet/account bypass

-
Image
https://github.com/the-P1neapple/WinJS-Microsoft-Account-Bypass WinJS-Microsoft-Account-Bypass Overview This guide explains a method to bypass the Microsoft Account (MSA) requirement during the Windows 11 Out-Of-Box Experience (OOBE) by using the Developer Console to invoke a hidden local account setup screen. This method was discovered by examining the Windows 11 OOBE source code, which revealed an event listener for a hidden  _localAccountButton . Note A faster method has since been discovered using Command Prompt ( Source ), this repo was made 7 months prior to that discovery. The method I have documented is still the only known method for S-Mode installations. Following these steps, you can create a local account without needing to sign in with or create a Microsoft account. I also have a  Youtube Tutorial  that follows the same instructions below Steps to Bypass Microsoft Account Setup 1. Start Windows 11 Setup Begin the Windows 11 Setup Process. Select your region a...
Read more