How to pair multiple devices Aftershokz

-

 It works for most AfteShokz device

How do I pair Air to multiple devices?

Trekz Air offers multipoint pairing, which allows users to connect to two devices at the same time. While you won’t receive audio from both devices at the same time, you’ll be able to seamlessly transition from one device to the other.

To pair multiple devices through multipoint pairing:

1. Start with your headphones turned off.

2. Enter pairing mode by pressing and holding the volume+ button for 5-7 seconds, until the LED light flashes red and blue.

3. Press and hold the multifunction button and volume+ button for 2-3 seconds. Audrey says "Multipoint Enabled."

4. Pair first device. Audrey says "Connected."

5. Turn your headphones off.

6. Re-enter pairing mode by pressing and holding the volume+ button for 5-7 seconds, until the LED light flashes red and blue.

7. Pair the second device. Audrey says "Device Two Connected."

8. Turn your headphones off.

Comments

Post a Comment

Popular posts from this blog

Extracting and using a modified VMWare Player BIOS or UEFI firmware

-
https://pete.akeo.ie/2011/06/extracting-and-using-modified-vmware.html Extracting and using a modified VMWare Player BIOS or UEFI firmware (updated 2016.05.17 for VMWare UEFI firmware extraction) One day or another, you may want to play with BIOS/UEFI firmware modification. But before jumping into physical motherboard flash alteration, where the consequences of a mishap can be difficult to salvage, experimenting with the BIOS/UEFI in a virtual environment sounds like a sound first step. You have of course the opportunity to do so using  bochs , however the ubiquitous nature and ease of use of the (freely available)  VMware Player  can turn the latter in a much better candidate for the job if you don't really care about the extra features that bochs brings in. This post details how one can extract the BIOS/UEFI firmwares used by the VMWare Player, and how to setup the player to use a modified one. Download and install VMware Player. The current version of VMwar...
Read more

Activate Synology Active Backup for Business for DSM 6

-
 Activate Synology Active Backup for Business with Xpenology DSM  https://gist.github.com/igresc/91e468f3d2ad5f2f7407262ba6f0dd56 Install the package and run the URL below on the browser . Active Backup for Business 1. Replace the IP, username, and password  http:// 192.168.0.1 :5000/webapi/auth.cgi?api=SYNO.API.Auth&method=Login&version=1&account= admin &passwd= password {"success":true} 2. Replace IP and Serial http:// 192.168.0.1 :5000/webapi/entry.cgi?api=SYNO.ActiveBackup.Activation&method=set&version=1&activated=true&serial_number= 1780PDN123456 {"data":{"activated":true},"success":true} Active Backup for G Suite 1. Replace IP http:// 192.168.0.1 :5000/webapi/entry.cgi?api=SYNO.ActiveBackupGSuite&method=get_activation&version=1 {"data":{"activated":false,"serial_number":"1780PDN123456"},"success":true} 2. Replace IP and Serial 1. Replace IP http:// 19...
Read more

Windows 11 internet/account bypass

-
Image
https://github.com/the-P1neapple/WinJS-Microsoft-Account-Bypass WinJS-Microsoft-Account-Bypass Overview This guide explains a method to bypass the Microsoft Account (MSA) requirement during the Windows 11 Out-Of-Box Experience (OOBE) by using the Developer Console to invoke a hidden local account setup screen. This method was discovered by examining the Windows 11 OOBE source code, which revealed an event listener for a hidden  _localAccountButton . Note A faster method has since been discovered using Command Prompt ( Source ), this repo was made 7 months prior to that discovery. The method I have documented is still the only known method for S-Mode installations. Following these steps, you can create a local account without needing to sign in with or create a Microsoft account. I also have a  Youtube Tutorial  that follows the same instructions below Steps to Bypass Microsoft Account Setup 1. Start Windows 11 Setup Begin the Windows 11 Setup Process. Select your region a...
Read more