Adtran 908e 2nd Twilio SIP to ShoreTel 2PRI (T1K) 46 channels

-

Adtran 908e 2nd Twilio SIP to 2PRI (T1K) 46 channels
Tested with ShoreTel T1K



Twilio account and create Elastic SIP Trunk


Adtran 908e 2nd


!
!
! ADTRAN, Inc. OS version R13.6.0.E
! Boot ROM version 14.05.00.SA
! Platform: Total Access 908e (2nd Gen), part number 4242908L1
! Serial number CFG1047000
!
!
hostname "T908e"
enable password level 2 password
!
!
clock timezone -5-Eastern-Time
!
ip subnet-zero
ip classless
ip default-gateway 192.168.1.1
ip routing
ipv6 unicast-routing
!
!
domain-proxy
name-server 1.1.1.1 1.0.0.1
!
!
no auto-config
!
event-history on
no logging forwarding
no logging email
!
no service password-encryption
!
portal-list "admin" console ftp http-admin ssh telnet
!
username "admin2" privilege 7 portal-list "admin" password "password"
username "admin" portal-list "admin" password "password"
ip forward-protocol udp time
ip forward-protocol udp nameserver
ip forward-protocol udp tacacs
ip forward-protocol udp tftp
ip forward-protocol udp netbios-ns
ip forward-protocol udp netbios-dgm
!
banner motd #
        Important
     
Web username/password is configured to admin/password.
Enable and Telnet passwords are configured to "password".
Please change them immediately.

The ethernet 0/1 interface is enabled with an address of 192.168.10.231
Telnet/SSH access is also enabled.
#
!
!
no ip firewall alg msn
no ip firewall alg mszone
no ip firewall alg h323
!
!
!
!
!
!
!
!
no dot11ap access-point-control
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface eth 0/1
  ip address  192.168.1.2  255.255.255.0
  no shutdown
  media-gateway ip primary
!
!
interface eth 0/2
  no ip address
  shutdown
!
!
!
!
interface t1 0/1
  description PRI01
  shutdown
!
interface t1 0/2
  description PRI02
  shutdown
!
interface t1 0/3
  description PRI03
  tdm-group 1 timeslots 1-24 speed 64
  no shutdown
!
interface t1 0/4
  description PRI04
  tdm-group 1 timeslots 1-24 speed 64
  no shutdown
!
!
interface pri 3
  description pri 3
  role network b-channel-restarts enable
  isdn name-delivery setup
  connect t1 0/3 tdm-group 1
  no shutdown
!
interface pri 4
  description pri 4
  role network b-channel-restarts enable
  isdn name-delivery setup
  connect t1 0/4 tdm-group 1
  no shutdown
!
!
interface fxs 0/1
  no shutdown
!
interface fxs 0/2
  no shutdown
!
interface fxs 0/3
  no shutdown
!
interface fxs 0/4
  no shutdown
!
interface fxs 0/5
  no shutdown
!
interface fxs 0/6
  no shutdown
!
interface fxs 0/7
  no shutdown
!
interface fxs 0/8
  no shutdown
!
!
interface fxo 0/0
  no shutdown
!
!
isdn-group 1
  connect pri 4
  connect pri 3
!
!
isdn-group 2
  connect pri 4
!
!
isdn-group 3
  connect pri 3
!
!
!
!
!
!
!
!
!
!
!
no tftp server
no tftp server overwrite
http server
http session-timeout 1800
no http secure-server
no snmp agent
ip ftp server
no ip scp server
no ip sntp server
!
!
!
!
!
!
!
!
sip
sip udp 5060
no sip tcp
!
!
voice international-prefix abbreviated
!
voice feature-mode network
voice forward-mode network
!
!
!
!
!
!
!
!
voice dial-plan 2 local NXX-NXX-XXXX
!
!
!
!
voice codec-list Default
  default
  codec g711ulaw
  codec g711alaw
  codec g729
  codec g722
!
!
!
voice trunk T01 type isdn
  description "PRI"
  resource-selection circular descending
  connect isdn-group 3
  rtp delay-mode adaptive
!
voice trunk T02 type sip
  description "Twilio"
  match dnis "411" substitute "01118003733411"
  match dnis "311" substitute "01112126399675"
  match dnis "1[2-7]XX5551212" substitute "01118003733411"
  match dnis "1XXXXXXXXXX" substitute "0111XXXXXXXXXX"
  sip-server primary sip.pstn.twilio.com
  outbound-proxy primary sip.pstn.twilio.com
  max-number-calls 23
!
!
voice grouped-trunk PRIGROUP
  description "PRI"
  trunk T01
  accept $ cost 0
  accept NXX-NXX-XXXX cost 0
  accept 1-NXX-NXX-XXXX cost 0
  accept 1-800-NXX-XXXX cost 0
  accept 1-888-NXX-XXXX cost 0
  accept 1-877-NXX-XXXX cost 0
  accept 1-866-NXX-XXXX cost 0
  accept 1-855-NXX-XXXX cost 0
  accept 011-$ cost 0
  accept 411 cost 0
  accept 611 cost 0
  reject NXX-976-XXXX
  reject 1-900-NXX-XXXX
  reject 1-976-NXX-XXXX
  reject 1-NXX-976-XXXX
!
!
voice grouped-trunk SIPGROUP
  description "SIP"
  trunk T02
  accept $ cost 0
  accept 1-NXX-NXX-XXXX cost 0
  accept 1-800-NXX-XXXX cost 0
  accept 1-888-NXX-XXXX cost 0
  accept 1-877-NXX-XXXX cost 0
  accept 1-866-NXX-XXXX cost 0
  accept 1-855-NXX-XXXX cost 0
  accept 011-$ cost 0
  accept 411 cost 0
  accept 611 cost 0
  accept NXX-NXX-XXXX cost 0
  reject 1-900-NXX-XXXX
  reject 1-976-NXX-XXXX
  reject 1-NXX-976-XXXX
  reject NXX-976-XXXX
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
sip grammar from user international
!
!
!
!
!
!
!
line con 0
  login
!
line telnet 0 4
  login
  password password
  no shutdown
line ssh 0 4
  login local-userlist
  no shutdown
!
!
ntp source ethernet 0/1
ntp master
ntp peer us.pool.ntp.org normal-sync source ethernet 0/1 prefer
!
!
!
end



Comments

Post a Comment

Popular posts from this blog

Extracting and using a modified VMWare Player BIOS or UEFI firmware

-
https://pete.akeo.ie/2011/06/extracting-and-using-modified-vmware.html Extracting and using a modified VMWare Player BIOS or UEFI firmware (updated 2016.05.17 for VMWare UEFI firmware extraction) One day or another, you may want to play with BIOS/UEFI firmware modification. But before jumping into physical motherboard flash alteration, where the consequences of a mishap can be difficult to salvage, experimenting with the BIOS/UEFI in a virtual environment sounds like a sound first step. You have of course the opportunity to do so using  bochs , however the ubiquitous nature and ease of use of the (freely available)  VMware Player  can turn the latter in a much better candidate for the job if you don't really care about the extra features that bochs brings in. This post details how one can extract the BIOS/UEFI firmwares used by the VMWare Player, and how to setup the player to use a modified one. Download and install VMware Player. The current version of VMwar...
Read more

Activate Synology Active Backup for Business for DSM 6

-
 Activate Synology Active Backup for Business with Xpenology DSM  https://gist.github.com/igresc/91e468f3d2ad5f2f7407262ba6f0dd56 Install the package and run the URL below on the browser . Active Backup for Business 1. Replace the IP, username, and password  http:// 192.168.0.1 :5000/webapi/auth.cgi?api=SYNO.API.Auth&method=Login&version=1&account= admin &passwd= password {"success":true} 2. Replace IP and Serial http:// 192.168.0.1 :5000/webapi/entry.cgi?api=SYNO.ActiveBackup.Activation&method=set&version=1&activated=true&serial_number= 1780PDN123456 {"data":{"activated":true},"success":true} Active Backup for G Suite 1. Replace IP http:// 192.168.0.1 :5000/webapi/entry.cgi?api=SYNO.ActiveBackupGSuite&method=get_activation&version=1 {"data":{"activated":false,"serial_number":"1780PDN123456"},"success":true} 2. Replace IP and Serial 1. Replace IP http:// 19...
Read more

Windows 11 internet/account bypass

-
Image
https://github.com/the-P1neapple/WinJS-Microsoft-Account-Bypass WinJS-Microsoft-Account-Bypass Overview This guide explains a method to bypass the Microsoft Account (MSA) requirement during the Windows 11 Out-Of-Box Experience (OOBE) by using the Developer Console to invoke a hidden local account setup screen. This method was discovered by examining the Windows 11 OOBE source code, which revealed an event listener for a hidden  _localAccountButton . Note A faster method has since been discovered using Command Prompt ( Source ), this repo was made 7 months prior to that discovery. The method I have documented is still the only known method for S-Mode installations. Following these steps, you can create a local account without needing to sign in with or create a Microsoft account. I also have a  Youtube Tutorial  that follows the same instructions below Steps to Bypass Microsoft Account Setup 1. Start Windows 11 Setup Begin the Windows 11 Setup Process. Select your region a...
Read more