Telnyx IP and ports
Telnyx IP and ports
SIP Signaling Addresses
OUTBOUND CALLS
Telnyx SIP Proxies are located in different regions. You can choose which region to use by configuring your SIP device to use any of the SIP proxies below:
| Region | FQDN | Primary IP Address | Secondary IP Address |
|---|---|---|---|
| US | sip.telnyx.com | 192.76.120.10 | 64.16.250.10 |
| Europe | sip.telnyx.eu | 185.246.41.140 | 185.246.41.141 |
| Australia | sip.telnyx.com.au | 103.115.244.145 | 103.115.244.146 |
| Canada | sip.telnyx.ca | 192.76.120.31 | 64.16.250.13 |
192.76.120.10
64.16.250.10
185.246.41.140
185.246.41.141
103.115.244.145
103.115.244.146
192.76.120.31
64.16.250.13
TRANSPORT PROTOCOLS
Telnyx supports the following transport protocols for SIP signaling:
| Transport Protocol | Port |
|---|---|
| UDP | 5060 |
| TCP | 5060 |
| TLS | 5061 |
Media
The RTP port range used by Telnyx is 16384 to 32768 (UDP).
Telnyx uses the following media IP addresses to handle RTP streams. If you use an ACL or Firewall on your network, make sure you whitelist these IP addresses:
SUBNETS (CONTAINING ALL MEDIA IPS)
50.114.136.128/25 50.114.144.0/21 64.16.226.0/24 64.16.227.0/24 64.16.228.0/24 64.16.229.0/24 64.16.230.0/24 64.16.248.0/24 64.16.249.0/24 103.115.244.128/25 185.246.41.128/25
STUN
Telnyx provides STUN service using the following addresses:
stun.telnyx.com:3478
Comments
Post a Comment