AdGuard Home on Rasbperry Pi

-

AdGuard Home on Raspberry Pi

Go to AdGuard Home page and download binaries for Raspberry Pi.
Let's download AdGuard Home and unpack it:
cd $HOME
wget https://static.adguard.com/adguardhome/release/AdGuardHome_linux_arm.tar.gz
tar xvf AdGuardHome_linux_arm.tar.gz
It will unpack into a new directory called AdGuardHome.
All you have to do is simply type this command to the Terminal:
sudo ./AdGuardHome -s install
Here are the other commands you might need to control the service.
  • AdGuardHome -s uninstall - uninstalls the AdGuard Home service.
  • AdGuardHome -s start - starts the service.
  • AdGuardHome -s stop - stops the service.
  • AdGuardHome -s restart - restarts the service.
  • AdGuardHome -s status - shows the current service status.

Visit the web interface

Once it's up and running, you can access your AdGuard Home web interface on port 3000 by typing this in your browser — http://192.168.10.20:3000/
Don't forget to substitute 192.168.10.20 with IP of your Pi.

Verify DNS filtering

You can verify that it's working properly by running this on your Pi:
host doubleclick.net 127.0.0.1
If everything works correctly, you will get this output:
Using domain server:
Name: 127.0.0.1
Address: 127.0.0.1#53
Aliases:

Host doubleclick.net not found: 3(NXDOMAIN)

Configure your devices to use your AdGuard Home

Now, once we've established that AdGuard Home works on our Raspberry Pi, you can use it on other computers in your network by changing their system DNS settings to use Pi's IP address (which is 192.168.10.20 in our case).

(Optionally) password-protect web interface

You have an option to password-protect your AdGuard Home's web interface so only you can access it.
To do so, stop it first:
sudo ./AdGuardHome -s stop
Then edit the configuration file:
sudo nano /home/pi/AdGuardHome/AdGuardHome.yaml
Find lines containing auth_name: "" and auth_pass: "" and replace them with username and password:
auth_name: "your-secret-name"
auth_pass: "your-secret-password"
Substitute name and password with your own, of course.
After you're done editing, save the file and start your AdGuard Home again:
sudo ./AdGuardHome -s start
After that, visiting web interface in a browser will ask for username and password.

Comments

Post a Comment

Popular posts from this blog

Extracting and using a modified VMWare Player BIOS or UEFI firmware

-
https://pete.akeo.ie/2011/06/extracting-and-using-modified-vmware.html Extracting and using a modified VMWare Player BIOS or UEFI firmware (updated 2016.05.17 for VMWare UEFI firmware extraction) One day or another, you may want to play with BIOS/UEFI firmware modification. But before jumping into physical motherboard flash alteration, where the consequences of a mishap can be difficult to salvage, experimenting with the BIOS/UEFI in a virtual environment sounds like a sound first step. You have of course the opportunity to do so using  bochs , however the ubiquitous nature and ease of use of the (freely available)  VMware Player  can turn the latter in a much better candidate for the job if you don't really care about the extra features that bochs brings in. This post details how one can extract the BIOS/UEFI firmwares used by the VMWare Player, and how to setup the player to use a modified one. Download and install VMware Player. The current version of VMwar...
Read more

Activate Synology Active Backup for Business for DSM 6

-
 Activate Synology Active Backup for Business with Xpenology DSM  https://gist.github.com/igresc/91e468f3d2ad5f2f7407262ba6f0dd56 Install the package and run the URL below on the browser . Active Backup for Business 1. Replace the IP, username, and password  http:// 192.168.0.1 :5000/webapi/auth.cgi?api=SYNO.API.Auth&method=Login&version=1&account= admin &passwd= password {"success":true} 2. Replace IP and Serial http:// 192.168.0.1 :5000/webapi/entry.cgi?api=SYNO.ActiveBackup.Activation&method=set&version=1&activated=true&serial_number= 1780PDN123456 {"data":{"activated":true},"success":true} Active Backup for G Suite 1. Replace IP http:// 192.168.0.1 :5000/webapi/entry.cgi?api=SYNO.ActiveBackupGSuite&method=get_activation&version=1 {"data":{"activated":false,"serial_number":"1780PDN123456"},"success":true} 2. Replace IP and Serial 1. Replace IP http:// 19...
Read more

Windows 11 internet/account bypass

-
Image
https://github.com/the-P1neapple/WinJS-Microsoft-Account-Bypass WinJS-Microsoft-Account-Bypass Overview This guide explains a method to bypass the Microsoft Account (MSA) requirement during the Windows 11 Out-Of-Box Experience (OOBE) by using the Developer Console to invoke a hidden local account setup screen. This method was discovered by examining the Windows 11 OOBE source code, which revealed an event listener for a hidden  _localAccountButton . Note A faster method has since been discovered using Command Prompt ( Source ), this repo was made 7 months prior to that discovery. The method I have documented is still the only known method for S-Mode installations. Following these steps, you can create a local account without needing to sign in with or create a Microsoft account. I also have a  Youtube Tutorial  that follows the same instructions below Steps to Bypass Microsoft Account Setup 1. Start Windows 11 Setup Begin the Windows 11 Setup Process. Select your region a...
Read more